Html & Script

CSS filter Property

페이지 정보

본문

Example

Change all images to black and white (100% gray):

img {
  filter: grayscale(100%);
}
Try it Yourself »

Tip: More "Try it Yourself" examples below.


Definition and Usage

The filter property defines visual effects (like blur and saturation) to an element (often <img>).

Default value:none
Inherited:no
Animatable:yes. Read about animatableTry it
Version:CSS3
JavaScript syntax:object.style.filter="grayscale(100%)"Try it

Browser Support

The numbers in the table specify the first browser version that fully supports the property.

Numbers followed by -webkit- specify the first version that worked with a prefix.

Property
filter53.0
18.0 -webkit-
13.035.09.1
6.0 -webkit-
40.0
15.0 -webkit-

Note: Older versions of Internet Explorer (4.0 to 8.0) supported a non-standard "filter" property that has been deprecated. This was mostly used for opacity when needed support from IE8 and down.



CSS Syntax

filter: none | blur() | brightness() | contrast() | drop-shadow() | grayscale() | hue-rotate() | invert() | opacity() | saturate() | sepia() | url();

Tip: To use multiple filters, separate each filter with a space (See "More Examples" below).


Filter Functions

Note: The filters that use percentage values (i.e. 75%), also accept the value as decimal (i.e. 0.75).

FilterDescriptionPlay it
noneDefault value. Specifies no effectsPlay it »
blur(px)Applies a blur effect to the image. A larger value will create more blur.

If no value is specified, 0 is used.
Play it »
brightness(%)Adjusts the brightness of the image.

0% will make the image completely black.
100% (1) is default and represents the original image.
Values over 100% will provide brighter results.
Play it »
contrast(%)Adjusts the contrast of the image.

0% will make the image completely black.
100% (1) is default, and represents the original image.
Values over 100% will provide results with more contrast.
Play it »
drop-shadow(h-shadow v-shadow blur spread color)Applies a drop shadow effect to the image.

Possible values:
h-shadow - Required. Specifies a pixel value for the horizontal shadow. Negative values place the shadow to the left of the image.

v-shadow - Required. Specifies a pixel value for the vertical shadow. Negative values place the shadow above the image.

blur - Optional. This is the third value, and must be in pixels. Adds a blur effect to the shadow. A larger value will create more blur (the shadow becomes bigger and lighter). Negative values are not allowed. If no value is specified, 0 is used (the shadow's edge is sharp).

spread - Optional. This is the fourth value, and must be in pixels. Positive values will cause the shadow to expand and grow bigger, and negative values will cause the shadow to shrink. If not specified, it will be 0 (the shadow will be the same size as the element).
Note: Chrome, Safari and Opera, and maybe other browsers, do not support this 4th length; it will not render if added.

color - Optional. Adds a color to the shadow. If not specified, the color depends on the browser (often black).

An example of creating a red shadow, which is 8px big both horizontally and vertically, with a blur effect of 10px:

filter: drop-shadow(8px 8px 10px red);

Tip: This filter is similar to the box-shadow property.
Play it »
grayscale(%)Converts the image to grayscale.

0% (0) is default and represents the original image.
100% will make the image completely gray (used for black and white images).

Note: Negative values are not allowed.
Play it »
hue-rotate(deg)Applies a hue rotation on the image. The value defines the number of degrees around the color circle the image samples will be adjusted. 0deg is default, and represents the original image.

Note: Maximum value is 360deg.
Play it »
invert(%)Inverts the samples in the image.

0% (0) is default and represents the original image.
100% will make the image completely inverted.

Note: Negative values are not allowed.
Play it »
opacity(%)Sets the opacity level for the image. The opacity-level describes the transparency-level, where:

0% is completely transparent.
100% (1) is default and represents the original image (no transparency).

Note: Negative values are not allowed.
Tip: This filter is similar to the opacity property.
Play it »
saturate(%)Saturates the image.

0% (0) will make the image completely un-saturated.
100% is default and represents the original image.
Values over 100% provides super-saturated results.

Note: Negative values are not allowed.
Play it »
sepia(%)Converts the image to sepia.

0% (0) is default and represents the original image.
100% will make the image completely sepia.

Note: Negative values are not allowed.
Play it »
url()The url() function takes the location of an XML file that specifies an SVG filter, and may include an anchor to a specific filter element. Example:

filter: url(svg-url#element-id)
initialSets this property to its default value. Read about initial
inheritInherits this property from its parent element. Read about inherit

More Examples

Blur Example

Apply a blur effect to the image:

img {
  filter: blur(5px);
}
Try it Yourself »

Blur Example 2

Apply a blurred background image:

img.background {
  filter: blur(35px);
}
Try it Yourself »

Brightness Example

Adjust the brightness of the image:

img {
  filter: brightness(200%);
}
Try it Yourself »

Contrast Example

Adjust the contrast of the image:

img {
  filter: contrast(200%);
}
Try it Yourself »

Drop Shadow Example

Apply a drop shadow effect to the image:

img {
  filter: drop-shadow(8px 8px 10px gray);
}
Try it Yourself »

Grayscale Example

Convert the image to grayscale:

img {
  filter: grayscale(50%);
}
Try it Yourself »

Hue Rotation Example

Apply a hue rotation on the image:

img {
  filter: hue-rotate(90deg);
}
Try it Yourself »

Invert Example

Invert the samples in the image:

img {
  filter: invert(100%);
}
Try it Yourself »

Opacity Example

Set the opacity level for the image:

img {
  filter: opacity(30%);
}
Try it Yourself »

Saturate Example

Saturate the image:

img {
  filter: saturate(800%);
}
Try it Yourself »

Sepia Example

Convert the image to sepia:

img {
  filter: sepia(100%);
}
Try it Yourself »

Using Multiple Filters

To use multiple filters, separate each filter with a space. Notice that the order is important (i.e. using grayscale() after sepia() will result in a completely gray image):

img {
  filter: contrast(200%) brightness(150%);
}
Try it Yourself »

All Filters

A demonstration of all filter functions:

.blur {
  filter: blur(4px);
}

.brightness {
  filter: brightness(0.30);
}

.contrast {
  filter: contrast(180%);
}

.grayscale {
  filter: grayscale(100%);
}

.huerotate {
  filter: hue-rotate(180deg);
}

.invert {
  filter: invert(100%);
}

.opacity {
  filter: opacity(50%);
}

.saturate {   filter

관련자료

최고관리자님의 댓글

<style>
img {
  width: 33%;
  height: auto;
  float: left;
}
.blur {-webkit-filter: blur(4px);filter: blur(4px);}
.brightness {-webkit-filter: brightness(0.30);filter: brightness(0.30);}
.contrast {-webkit-filter: contrast(180%);filter: contrast(180%);}
.grayscale {-webkit-filter: grayscale(100%);filter: grayscale(100%);}
.huerotate {-webkit-filter: hue-rotate(180deg);filter: hue-rotate(180deg);}
.invert {-webkit-filter: invert(100%);filter: invert(100%);}
.opacity {-webkit-filter: opacity(50%);filter: opacity(50%);}
.saturate {-webkit-filter: saturate(7); filter: saturate(7);}
.sepia {-webkit-filter: sepia(100%);filter: sepia(100%);}
.shadow {-webkit-filter: drop-shadow(8px 8px 10px green);filter: drop-shadow(8px 8px 10px green);}
</style>
[출처] filter css 효과 이미지 필터효과 흐림 blur 흑백grayscale 반전 invert|작성자 기니
Today's proverb
인생은 자유로이 여행할 수 있도록 시원하게 뚫린 대로가 아니다. 때로는 길을 잃고 헤매기도 하고 때로는 막다른 길에서 좌절하기도 하는 미로와 같다. (누가 내 치즈를 옮겼을까? 중에서)